Changzhou Ruihao Chemical Co., Ltd.

Committed to industrial bactericides, preservatives and...

Our products are being used in the antisepsis and sterilization field of water
treatment, paint, leather and wood.

Sales Hotline:

+86-519-81297986

Products
BiocideMore
Product name CAS NO. Molecular weight Details
Specification of OIT 45% 26530-20-1 213.33 more>
Specification of OIT 99% 26530-20-1 213.33 more>
CMIT/MIT 1.5% 26172-55-4/2682-20-4 149.59/115.14 more>
2,2-Dibromo-3-nitrilo-propionamide 20% 10222-01-2 242 more>
MIT 50% 2682-20-4 115.14 more>
DCOIT 64359-81-5 282.2274 more>
Paint & Coating In-can PreservativeMore
Product name Chemical composition Application Details
HENCIDE® CM15F CMIT/MIT and formaldehyde releaser

It is fit for the protection of liquid water products from microorganism, such as emulsion varnish, macromolecular synthesis latex, bond, enamel, loading agent and sealant. It can be used for additive in diluted metal manufacture liquid. The normal working concentration is 0.05~0.40%, which is up to the product storing condition and whether the products are easy to be corroded by microorganism.

more>
HENCIDE® CN15B CIT/MIT and bronopol

Steady univalent metal salt does not contain isothiazolinone/bronopol pesticide of VOC. It is fit for the water hygrometric state antiseptic of the products allergic to formaldehyde and bivalence metal ion.

more>
HENCIDE® MB MIT/BIT compound

It is a new generation of synergism antiseptic that does not contains CIT, AOX and VOC, especially for the water hygrometric state antiseptic of the products allergic to formaldehyde and bivalence metal ion. It can be used to protect the water products (such as emulsion varnish, polymerization latex, adhesive, enamel, loading agent, sealant, etc.) from hazardous microorganism pollution under hygrometric state, especially for high PH value environmentally protective products. The recommended concentration is 0.2 - 0.4%.

more>
HENCIDE® CN150 Aqueous CIT/MIT formulation (monovalent metal ion stable)

It is fit for the protection of water products from microorganism, such as emulsion varnish, macromolecular synthesis latex, cosmetic, detergent, adhesive, enamel, loading agent and sealant, and it can be used for additive in diluted metal manufacture liquid. The normal concentration is 0.05~0.40%. It is especially fit for the products that do not dissolve in Mg2+/Cu2+ divalent ion antiseptic.

more>
HENCIDE® CM150 Aqueous CIT/MIT formulation (magnesium salts stabilizer)

It is fit for the protection of water products from microorganism, such as emulsion varnish, macromolecular synthesis latex, cosmetic, detergent, adhesive, enamel, loading agent and sealant, and it can be used for additive in diluted metal manufacture liquid. The normal concentration is 0.05~0.40%.

more>
HENCIDE® M10 Aqueous MIT formulation

It is a kind of anti-corrosion active solution fit for coating, base, adhesive and other industrial products. The anti-corrosion active matter of this product can be used in the protection of coating that touches food. It is the pure water solution of anti-corrosion active component that does not contain VOC and AOX. The normal adding amount range is: 0.05 - 0.15%.

more>
Paint & Coating Dry FilmMore
Product name Chemical composition Application Details
HENCIDE®OT45 OIT in solvent

It has strong killing ability with broad activity range and lower effective dosage compared to general preservative. It can be nearly used in all the paints, such as acrylic acid, polyvinyl acetate (PVA) and other latex, solvent paint and alkyd paint. It is liquid, so it is easy to add in latex and paint.
Adding it during adjusting paint: mix it with propanediol and texanol, and then slowly stirring it, later adding thickening agent. The general dosage is 0.1~0.3% of product weight.

more>
HENCIDE ®DC30 DCOIT IN SOLVENT

It is a high efficiency coating film antiseptic with excellent anti-elegant and bacteria-proof. It can be widely used in quite important areas, such as broad-spectrum anti- microorganism and low water-solubility, especially for the ade paint. In order to protect coating film, the largest dosage of active component is 1150ppm. The outdoor dosage is 0.12-0.5% of product weight.

more>
HENCIDE®BOD Combination of benzimidazole carbamate, OIT and a urea derivative

It can effectively restrain bacteria, microzyme, mildew, wood fading epiphyte and algae. The recommended dosage is 0.5 - 2.5% and the largest is 4%.

more>
Bactericides For PapermakingMore
Product name Chemical composition Application Details
HENCIDE PT400
more>
HENCIDE PT200
more>
HENCIDE QK25
more>

    Home  |  About Us  |  Products  |  MSDS  |  Marketing News  |  Contact Us  |  中文版

    Copyright(C)2018, Changzhou Ruihao Chemical Co., Ltd. All Rights Reserved. Supported by ChemNet ChinaChemNet Toocle Copyright Notice 备案序号:苏ICP备05042830号